Sterling Sleep Systems

Step 1 of 7: Which size mattress would you like?

Select the mattress size you want. Eastern King 76" x 80" - California King 72" x 84" - Queen 60" x 80" - Full 54" x 75" - Twin 37" x 75"

Which size mattress would you like?

Step 2 of 7: Comfort Level (Twin)

Choose a Softside Mattress Model

$847.40 8300 Plush Top Softside Waterbed Top - Twin The Plush Top cover system contains four foam rails and a safety liner that protects and extends the longevity of your mattress. A quilted top also is a... read more The Plush Top cover system contains four foam rails and a safety liner that protects and extends the longevity of your mattress. A quilted top also is a great way to reduce the wave activity of your softside waterbed instantly Four Foam Rails Safety Liner Cover System Replaceable Extend the life of your waterbed indefinitely with a top panel that can be zipped on, replaced, and upgraded, each in just seconds. Plush Comfort The Plush top Mattress cover adds a cloud-like layer to enhance the comfort of your waterbed without changing the level of support. Upgradeable When it’s time to replace your mattress cover, you can choose the same plush comfort or upgrade to a pillow top or euro top. *This is for the cover system, 4-foam rails and safety liner only. **It does not include the waterbed bladder, heater, foundation metal bed frame or any other accessories.

Step 2 of 7: Comfort Level (Full)

Choose a Softside Mattress Model

$1,024.20 8300 Plush Top Softside Waterbed Top - Full 53in x 75in The Plush Top cover system contains four foam rails and a safety liner that protects and extends the longevity of your mattress. A quilted top also is a... read more The Plush Top cover system contains four foam rails and a safety liner that protects and extends the longevity of your mattress. A quilted top also is a great way to reduce the wave activity of your softside waterbed instantly Four Foam Rails Safety Liner Cover System Replaceable Extend the life of your waterbed indefinitely with a top panel that can be zipped on, replaced, and upgraded, each in just seconds. Plush Comfort The Plush top Mattress cover adds a cloud-like layer to enhance the comfort of your waterbed without changing the level of support. Upgradeable When it’s time to replace your mattress cover, you can choose the same plush comfort or upgrade to a pillow top or euro top. *This is for the cover system, 4-foam rails and safety liner only. **It does not include the waterbed bladder, heater, foundation metal bed frame or any other accessories.

Step 2 of 7: Comfort Level (Queen)

Choose a Softside Mattress Model

$1,024.20 8300 Plush Top Softside Waterbed Top - Queen 60in x 80in The Plush Top cover system contains four foam rails and a safety liner that protects and extends the longevity of your mattress. A quilted top also is a... read more The Plush Top cover system contains four foam rails and a safety liner that protects and extends the longevity of your mattress. A quilted top also is a great way to reduce the wave activity of your softside waterbed instantly Four Foam Rails Safety Liner Cover System Replaceable Extend the life of your waterbed indefinitely with a top panel that can be zipped on, replaced, and upgraded, each in just seconds. Plush Comfort The Plush top Mattress cover adds a cloud-like layer to enhance the comfort of your waterbed without changing the level of support. Upgradeable When it’s time to replace your mattress cover, you can choose the same plush comfort or upgrade to a pillow top or euro top. *This is for the cover system, 4-foam rails and safety liner only. **It does not include the waterbed bladder, heater, foundation metal bed frame or any other accessories.

$1,177.20 8400 Pillow Top Softside Waterbed Top - Queen 60in x 80in The Pillow Top is one of our most popular cover systems for Softsides. Enjoy plush comfort that zips on in seconds and contours to your body all night... read more The Pillow Top is one of our most popular cover systems for Softsides. Enjoy plush comfort that zips on in seconds and contours to your body all night without reducing the support of your underlying mattress. This cover system will help reduce some of the motion in your bed. Swap your pillowtop to renew your mattress over the years or upgrade to a Euro topper to enjoy even greater comfort, or replace it with a Plush Top cover for a slightly firmer feel This cover system includes: Four Foam Rails Safety Liner Complete cover system Replaceable Extend the life of your waterbed indefinitely with a replaceable quilted cover that can be zipped on, replaced, and upgraded, each in just seconds. Upgradeable When it’s time to replace your mattress cover, you can choose the same pillow top or change to a plush top or euro top. *This is for the cover system, border panel, foam rails and safety liner only. **It does not include the waterbed bladder, heater, foundation metal bed frame or any other accessories.

$1,303.80 8500 Euro Top Softside Waterbed Top - Queen 60in x 80in The Softside Waterbed Euro Top is our premium cover system. It zips on in just seconds and transforms your mattress into the ultimate sleep system: a choice of firm... read more The Softside Waterbed Euro Top is our premium cover system. It zips on in just seconds and transforms your mattress into the ultimate sleep system: a choice of firm latex, or plush memory foam for each sleeper allows you to customize the comfort on each side of the bed, and a supportive softside waterbed below. Create the perfect balance between a traditional bed and a waterbed with a Euro Top that instantly reduces wave activity and provides individualized comfort for you and your partner. Each cover system includes: Cover System Border Panel Foam Rails Safety Liner Your choice of Firm Latex, and/or Plush Memory foam for each side of the bed (Two-1/2 sheets to cover the top of your bed, Latex and Memory foam sold separately ) More Traditional Feel A Euro Top cover system from Sterling is defined as an add-on 3" compartment, that houses 2, 3" layers of foam, or "comfort layers" that are used to customize the feel of your side of the bed. Replaceable Layers When it’s time to replace your quilted cover, you don’t have to buy a whole new cover system. The Euro Top allows you to replace only the quilted cover on top of your bed, and/or replace the individual comfort layers inside of the euro gusset compartment for lasting value. Wave Control Wave control in any of our beds is mostly handled by the selection of waterbed bladder (not included with this part number). By adding a Euro Top cover system and comfort layers, the feel of the water, as well as the motion is further reduced. By absorbing motion transfer, the Euro Top also helps eliminate unwanted wave activity from your softside waterbed mattress below. *This is for the cover system, border panel, foam rails and safety liner only. **It does not include the Latex or Memory foam overlays, waterbed bladder, heater, foundation metal bed frame or any other accessories.

Step 2 of 7: Comfort Level (California King)

Choose a Softside Mattress Model

$1,182.00 8300 Plush Top Softside Waterbed Top - California King 72in x 84in The Plush Top cover system contains four foam rails and a safety liner that protects and extends the longevity of your mattress. A quilted top also is a... read more The Plush Top cover system contains four foam rails and a safety liner that protects and extends the longevity of your mattress. A quilted top also is a great way to reduce the wave activity of your softside waterbed instantly Four Foam Rails Safety Liner Cover System Replaceable Extend the life of your waterbed indefinitely with a top panel that can be zipped on, replaced, and upgraded, each in just seconds. Plush Comfort The Plush top Mattress cover adds a cloud-like layer to enhance the comfort of your waterbed without changing the level of support. Upgradeable When it’s time to replace your mattress cover, you can choose the same plush comfort or upgrade to a pillow top or euro top. *This is for the cover system, 4-foam rails and safety liner only. **It does not include the waterbed bladder, heater, foundation metal bed frame or any other accessories.

$1,332.60 8400 Pillow Top Softside Waterbed Top - California King 72inx84in The Pillow Top is one of our most popular cover systems for Softsides. Enjoy plush comfort that zips on in seconds and contours to your body all night... read more The Pillow Top is one of our most popular cover systems for Softsides. Enjoy plush comfort that zips on in seconds and contours to your body all night without reducing the support of your underlying mattress. This cover system will help reduce some of the motion in your bed. Swap your pillowtop to renew your mattress over the years or upgrade to a Euro topper to enjoy even greater comfort, or replace it with a Plush Top cover for a slightly firmer feel This cover system includes: Four Foam Rails Safety Liner Complete cover system Replaceable Extend the life of your waterbed indefinitely with a replaceable quilted cover that can be zipped on, replaced, and upgraded, each in just seconds. Upgradeable When it’s time to replace your mattress cover, you can choose the same pillow top or change to a plush top or euro top. *This is for the cover system, border panel, foam rails and safety liner only. **It does not include the waterbed bladder, heater, foundation metal bed frame or any other accessories.

$1,456.80 8500 Euro Top Softside Waterbed Top - California King 72inx84in The Softside Waterbed Euro Top is our premium cover system. It zips on in just seconds and transforms your mattress into the ultimate sleep system: a choice of firm... read more The Softside Waterbed Euro Top is our premium cover system. It zips on in just seconds and transforms your mattress into the ultimate sleep system: a choice of firm latex, or plush memory foam for each sleeper allows you to customize the comfort on each side of the bed, and a supportive softside waterbed below. Create the perfect balance between a traditional bed and a waterbed with a Euro Top that instantly reduces wave activity and provides individualized comfort for you and your partner. Each cover system includes: Cover System Border Panel Foam Rails Safety Liner Your choice of Firm Latex, and/or Plush Memory foam for each side of the bed (Two-1/2 sheets to cover the top of your bed, Latex and Memory foam sold separately ) More Traditional Feel A Euro Top cover system from Sterling is defined as an add-on 3" compartment, that houses 2, 3" layers of foam, or "comfort layers" that are used to customize the feel of your side of the bed. Replaceable Layers When it’s time to replace your quilted cover, you don’t have to buy a whole new cover system. The Euro Top allows you to replace only the quilted cover on top of your bed, and/or replace the individual comfort layers inside of the euro gusset compartment for lasting value. Wave Control Wave control in any of our beds is mostly handled by the selection of waterbed bladder (not included with this part number). By adding a Euro Top cover system and comfort layers, the feel of the water, as well as the motion is further reduced. By absorbing motion transfer, the Euro Top also helps eliminate unwanted wave activity from your softside waterbed mattress below. *This is for the cover system, border panel, foam rails and safety liner only. **It does not include the Latex or Memory foam overlays, waterbed bladder, heater, foundation metal bed frame or any other accessories.

Step 2 of 7: Comfort Level (Eastern King)

Choose a Softside Mattress Model

$1,182.00 8300 Plush Top Softside Waterbed Top - Eastern King 76in x 80in The Plush Top cover system contains four foam rails and a safety liner that protects and extends the longevity of your mattress. A quilted top also is a... read more The Plush Top cover system contains four foam rails and a safety liner that protects and extends the longevity of your mattress. A quilted top also is a great way to reduce the wave activity of your softside waterbed instantly Four Foam Rails Safety Liner Cover System Replaceable Extend the life of your waterbed indefinitely with a top panel that can be zipped on, replaced, and upgraded, each in just seconds. Plush Comfort The Plush top Mattress cover adds a cloud-like layer to enhance the comfort of your waterbed without changing the level of support. Upgradeable When it’s time to replace your mattress cover, you can choose the same plush comfort or upgrade to a pillow top or euro top. *This is for the cover system, 4-foam rails and safety liner only. **It does not include the waterbed bladder, heater, foundation metal bed frame or any other accessories.

$1,332.60 8400 Pillow Top Softside Waterbed Top - Eastern King 76in x 80in The Pillow Top is one of our most popular cover systems for Softsides. Enjoy plush comfort that zips on in seconds and contours to your body all night... read more The Pillow Top is one of our most popular cover systems for Softsides. Enjoy plush comfort that zips on in seconds and contours to your body all night without reducing the support of your underlying mattress. This cover system will help reduce some of the motion in your bed. Swap your pillowtop to renew your mattress over the years or upgrade to a Euro topper to enjoy even greater comfort, or replace it with a Plush Top cover for a slightly firmer feel This cover system includes: Four Foam Rails Safety Liner Complete cover system Replaceable Extend the life of your waterbed indefinitely with a replaceable quilted cover that can be zipped on, replaced, and upgraded, each in just seconds. Upgradeable When it’s time to replace your mattress cover, you can choose the same pillow top or change to a plush top or euro top. *This is for the cover system, border panel, foam rails and safety liner only. **It does not include the waterbed bladder, heater, foundation metal bed frame or any other accessories.

$1,456.80 8500 Euro Top Softside Waterbed Top - Eastern King 76in x 80in The Softside Waterbed Euro Top is our premium cover system. It zips on in just seconds and transforms your mattress into the ultimate sleep system: a choice of firm... read more The Softside Waterbed Euro Top is our premium cover system. It zips on in just seconds and transforms your mattress into the ultimate sleep system: a choice of firm latex, or plush memory foam for each sleeper allows you to customize the comfort on each side of the bed, and a supportive softside waterbed below. Create the perfect balance between a traditional bed and a waterbed with a Euro Top that instantly reduces wave activity and provides individualized comfort for you and your partner. Each cover system includes: Cover System Border Panel Foam Rails Safety Liner Your choice of Firm Latex, and/or Plush Memory foam for each side of the bed (Two-1/2 sheets to cover the top of your bed, Latex and Memory foam sold separately ) More Traditional Feel A Euro Top cover system from Sterling is defined as an add-on 3" compartment, that houses 2, 3" layers of foam, or "comfort layers" that are used to customize the feel of your side of the bed. Replaceable Layers When it’s time to replace your quilted cover, you don’t have to buy a whole new cover system. The Euro Top allows you to replace only the quilted cover on top of your bed, and/or replace the individual comfort layers inside of the euro gusset compartment for lasting value. Wave Control Wave control in any of our beds is mostly handled by the selection of waterbed bladder (not included with this part number). By adding a Euro Top cover system and comfort layers, the feel of the water, as well as the motion is further reduced. By absorbing motion transfer, the Euro Top also helps eliminate unwanted wave activity from your softside waterbed mattress below. *This is for the cover system, border panel, foam rails and safety liner only. **It does not include the Latex or Memory foam overlays, waterbed bladder, heater, foundation metal bed frame or any other accessories.

Step 2A of 7: Foam Overlay (Queen)

Choose the foam overlay for Side 1 of your bed.

$417.38 3" Firm Latex Foam Overlay - Queen 3inx30x80 (1/2 Qn) 100% Latex Foam with Fire Retardant Stretch Cover. 34 ILD King, Queen and Full require 2 pieces to cover the mattress. OK to mix with Memory Foam or other 2" foam... read more 100% Latex Foam with Fire Retardant Stretch Cover. 34 ILD King, Queen and Full require 2 pieces to cover the mattress. OK to mix with Memory Foam or other 2" foam overlays

$417.38 3" Plush Memory Foam Overlay - Queen 3in x 30in x 80in (1/2 Qn) 3" Memory Foam, 5 pound density. With Fire Retardant Stretch cover. King, Queen and Full require 2 pieces to cover the mattress. It's OK to mix with Latex... read more 3" Memory Foam, 5 pound density. With Fire Retardant Stretch cover. King, Queen and Full require 2 pieces to cover the mattress. It's OK to mix with Latex or other 3" Foams.

Step 2A of 7: Foam Overlay (East King)

Choose the foam overlay for Side 2 of your bed.

$523.95 3" Firm Latex Foam Overlay - Eastern King 3in x 38in x 80in (1/2 EK) 100% Latex Foam with Fire Retardant Stretch Cover. 34 ILD King, Queen and Full require 2 pieces to cover the mattress. OK to mix with Memory Foam or other 2" foam... read more 100% Latex Foam with Fire Retardant Stretch Cover. 34 ILD King, Queen and Full require 2 pieces to cover the mattress. OK to mix with Memory Foam or other 2" foam overlays

$523.95 3" Plush Memory Foam Overlay - Eastern King 3in x 38in x 80in (1/2 EK) 3" Memory Foam, 5 pound density. With Fire Retardant Stretch cover. King, Queen and Full require 2 pieces to cover the mattress. It's OK to mix with Latex... read more 3" Memory Foam, 5 pound density. With Fire Retardant Stretch cover. King, Queen and Full require 2 pieces to cover the mattress. It's OK to mix with Latex or other 3" Foams.

Step 2B of 7: Foam Overlay (Cali King)

Choose the foam overlay for Side 2 of your bed.

$523.95 3" Firm Latex Foam Overlay - California King 3inx 36inx84in (1/2CK) 100% Latex Foam with Fire Retardant Stretch Cover. 34 ILD King, Queen and Full require 2 pieces to cover the mattress. OK to mix with Memory Foam or other 2" foam... read more 100% Latex Foam with Fire Retardant Stretch Cover. 34 ILD King, Queen and Full require 2 pieces to cover the mattress. OK to mix with Memory Foam or other 2" foam overlays

$523.95 3" Plush Memory Foam Overlay - California King 3in x 36in x 84in (1/2 CK) 3" Memory Foam, 5 pound density. With Fire Retardant Stretch cover. King, Queen and Full require 2 pieces to cover the mattress. It's OK to mix with Latex... read more 3" Memory Foam, 5 pound density. With Fire Retardant Stretch cover. King, Queen and Full require 2 pieces to cover the mattress. It's OK to mix with Latex or other 3" Foams.

Step 2B of 7: Foam Overlay (Queen)

Choose the foam overlay for Side 2 of your bed.

$417.38 3" Firm Latex Foam Overlay - Queen 3inx30x80 (1/2 Qn) 100% Latex Foam with Fire Retardant Stretch Cover. 34 ILD King, Queen and Full require 2 pieces to cover the mattress. OK to mix with Memory Foam or other 2" foam... read more 100% Latex Foam with Fire Retardant Stretch Cover. 34 ILD King, Queen and Full require 2 pieces to cover the mattress. OK to mix with Memory Foam or other 2" foam overlays

$417.38 3" Plush Memory Foam Overlay - Queen 3in x 30in x 80in (1/2 Qn) 3" Memory Foam, 5 pound density. With Fire Retardant Stretch cover. King, Queen and Full require 2 pieces to cover the mattress. It's OK to mix with Latex... read more 3" Memory Foam, 5 pound density. With Fire Retardant Stretch cover. King, Queen and Full require 2 pieces to cover the mattress. It's OK to mix with Latex or other 3" Foams.

Step 2A of 7: Foam Overlay (Cali King)

Choose the foam overlay for Side 2 of your bed.

$523.95 3" Firm Latex Foam Overlay - California King 3inx 36inx84in (1/2CK) 100% Latex Foam with Fire Retardant Stretch Cover. 34 ILD King, Queen and Full require 2 pieces to cover the mattress. OK to mix with Memory Foam or other 2" foam... read more 100% Latex Foam with Fire Retardant Stretch Cover. 34 ILD King, Queen and Full require 2 pieces to cover the mattress. OK to mix with Memory Foam or other 2" foam overlays

$523.95 3" Plush Memory Foam Overlay - California King 3in x 36in x 84in (1/2 CK) 3" Memory Foam, 5 pound density. With Fire Retardant Stretch cover. King, Queen and Full require 2 pieces to cover the mattress. It's OK to mix with Latex... read more 3" Memory Foam, 5 pound density. With Fire Retardant Stretch cover. King, Queen and Full require 2 pieces to cover the mattress. It's OK to mix with Latex or other 3" Foams.

Step 2B of 7: Foam Overlay (East King)

Choose the foam overlay for Side 2 of your bed.

$523.95 3" Firm Latex Foam Overlay - Eastern King 3in x 38in x 80in (1/2 EK) 100% Latex Foam with Fire Retardant Stretch Cover. 34 ILD King, Queen and Full require 2 pieces to cover the mattress. OK to mix with Memory Foam or other 2" foam... read more 100% Latex Foam with Fire Retardant Stretch Cover. 34 ILD King, Queen and Full require 2 pieces to cover the mattress. OK to mix with Memory Foam or other 2" foam overlays

$523.95 3" Plush Memory Foam Overlay - Eastern King 3in x 38in x 80in (1/2 EK) 3" Memory Foam, 5 pound density. With Fire Retardant Stretch cover. King, Queen and Full require 2 pieces to cover the mattress. It's OK to mix with Latex... read more 3" Memory Foam, 5 pound density. With Fire Retardant Stretch cover. King, Queen and Full require 2 pieces to cover the mattress. It's OK to mix with Latex or other 3" Foams.

Step 3 of 7: California King Bladders

Choose the bladder you want for your bed.

$604.20 ER400 Super Waveless, Back Support, Softside Waterbed Mattress, Deep Fill (8")- 2nd most waveless The third layer of lumbar support in the ER400 makes it one of our most popular models. Most sleepers struggle with back pain on mattresses that are too... read more The third layer of lumbar support in the ER400 makes it one of our most popular models. Most sleepers struggle with back pain on mattresses that are too soft and body aches on beds that are too firm. This super waveless model gives you extra support where you need it and responsive cradling where you don’t. Three Lumbar Layers As sleep system designers, we take back pain seriously. You don’t have to accept inadequate support. The ER400 will cradle the natural curvature of your spine with three lumbar layers to eliminate your pain. Four Full-Size Layers Four 1.5-ounce fiber layers envelop the water bladder to provide structure, stability, and dreamy comfort. You’ll feel weightless and serene atop our most popular model and wake up feeling energized. Super Waveless The seven layers and tethering system of the ER400 Softside Waterbed Mattress minimize motion so you can get comfortable faster, sleep through the night, and avoid disturbing your partner. Deep Bladder 8” Why choose a deep water bladder? You want to sleep like a weightless baby on plush, cloud-like comfort, and that requires more than six inches of water. If you’re looking for more firmness, try our mid-fill. The Real Benefit Unlike foam beds in a box, innerspring beds or air beds, waterbeds never get softer with time. The level of support you feel the very first night, is the same level of comfort you will get 5, 10, 15 years or beyond from now, making waterbeds right right choice for most sleepers. While most traditional beds may only last 8-10 years, our waterbeds are able to remain in use up to 30 years with proper care.

$739.20 ER600 Super Waveless, Edge Support, Back Support, Softside Waterbed Mattress, Deep Fill (8") The ER600’s distinguishing feature is its Progressive Rate Spring (US Patent #4905331). This system adjusts to your weight and position to cushion your pressure points and perfectly support... read more The ER600’s distinguishing feature is its Progressive Rate Spring (US Patent #4905331). This system adjusts to your weight and position to cushion your pressure points and perfectly support your lumbar region, eliminating the dreaded droop that causes back pain. Sleep through the night without disturbing your partner on a mattress that’s never too soft or too firm. Edge Support Our patented edge support system maintains a slightly firmer border compared to the middle of your mattress, keeping you in your perfect sleep position all night. Individualized Comfort The Progressive Rate Spring is a panted support system inside the ER600 Softside Waterbed Mattress. It responds to your weight and position for perfect comfort without disturbing your partner. Lumbar Support Back pain makes it hard to shop for a bed, but not at Sterling. The ER600 Softside Waterbed Mattress with back support eliminates back pain without sacrificing comfort. Super Waveless Wave reduction is crucial to achieving a good night’s sleep. Our Super Waveless ER600 is an 8” water bladder with a wave-eliminating tether system to minimize any unwanted ocean motion.

$352.80 ER9254 Waveless, Back Support, Softside Waterbed Mattress, Deep Fill (8")- 2nd Most Waveless - California King 72in x 84in / Single Designed for the average sleeper, this waveless deep fill model offers a strategically placed lumbar support layer to help eliminate sleep-related back pain. The Sterling Endura III PVS... read more Designed for the average sleeper, this waveless deep fill model offers a strategically placed lumbar support layer to help eliminate sleep-related back pain. The Sterling Endura III PVS structure and tethered wave control system help you and your partner fall asleep and stay asleep. Lumbar Support An added support layer across the lumbar region supports the lower curvature of your spine to keep you pain-free throughout the night. Wave Control Our tethered wave control system minimizes motion and transference so you can fall asleep faster and stay asleep longer without waking your partner. 3 Full-Size Layers The lumbar layer and water bladder are situated between three full-size, 1.5-ounce fiber layers that provide additional support. Deep Bladder 8” A deep water bladder ensures plenty of water between the 1.5-ounce fiber layers to keep you supported and comfortable.

$441.00 ER9256 Super Waveless, Back Support, Softside Waterbed Mattress, Deep Fill (8")- Most Waveless You don’t have to sacrifice total comfort for back support. Our most waveless mattress gives you both! The 8” water bladder rests between four full-sized layers of 1.5-ounce... read more You don’t have to sacrifice total comfort for back support. Our most waveless mattress gives you both! The 8” water bladder rests between four full-sized layers of 1.5-ounce fiber with two layers of lumbar support right where you need it. The tethered wave control system and Sterling Endura III PVC structure minimize motion so you can fall asleep fast and stay asleep through the night. Cloud Comfort The ER9256 Waveless Softside Waterbed Mattress is an engineering masterpiece that combines the cradling comfort of a water bladder with supportive internal and external structures. Lumbar Support One of the most essential features of a mattress is how well it supports your back. The ER9256 supports the correct curvature of your entire spine with a double layer of lumbar support. Most Waveless The problem with traditional waterbeds is the motion that tosses you around while you’re trying to get comfortable and sleep. The ER9256 is structured to minimize waves for undisturbed slumber. Deep Fill The water bladder in the ER9256 is eight inches deep, providing you and your sleep partner with one of the most comfortable and contouring water mattress experiences available.

Step 3 of 7: Queen Bladders

Choose the bladder you want for your bed.

$604.20 ER400 Super Waveless, Back Support, Softside Waterbed Mattress, Deep Fill (8")- 2nd most waveless The third layer of lumbar support in the ER400 makes it one of our most popular models. Most sleepers struggle with back pain on mattresses that are too... read more The third layer of lumbar support in the ER400 makes it one of our most popular models. Most sleepers struggle with back pain on mattresses that are too soft and body aches on beds that are too firm. This super waveless model gives you extra support where you need it and responsive cradling where you don’t. Three Lumbar Layers As sleep system designers, we take back pain seriously. You don’t have to accept inadequate support. The ER400 will cradle the natural curvature of your spine with three lumbar layers to eliminate your pain. Four Full-Size Layers Four 1.5-ounce fiber layers envelop the water bladder to provide structure, stability, and dreamy comfort. You’ll feel weightless and serene atop our most popular model and wake up feeling energized. Super Waveless The seven layers and tethering system of the ER400 Softside Waterbed Mattress minimize motion so you can get comfortable faster, sleep through the night, and avoid disturbing your partner. Deep Bladder 8” Why choose a deep water bladder? You want to sleep like a weightless baby on plush, cloud-like comfort, and that requires more than six inches of water. If you’re looking for more firmness, try our mid-fill. The Real Benefit Unlike foam beds in a box, innerspring beds or air beds, waterbeds never get softer with time. The level of support you feel the very first night, is the same level of comfort you will get 5, 10, 15 years or beyond from now, making waterbeds right right choice for most sleepers. While most traditional beds may only last 8-10 years, our waterbeds are able to remain in use up to 30 years with proper care.

$739.20 ER600 Super Waveless, Edge Support, Back Support, Softside Waterbed Mattress, Deep Fill (8") The ER600’s distinguishing feature is its Progressive Rate Spring (US Patent #4905331). This system adjusts to your weight and position to cushion your pressure points and perfectly support... read more The ER600’s distinguishing feature is its Progressive Rate Spring (US Patent #4905331). This system adjusts to your weight and position to cushion your pressure points and perfectly support your lumbar region, eliminating the dreaded droop that causes back pain. Sleep through the night without disturbing your partner on a mattress that’s never too soft or too firm. Edge Support Our patented edge support system maintains a slightly firmer border compared to the middle of your mattress, keeping you in your perfect sleep position all night. Individualized Comfort The Progressive Rate Spring is a panted support system inside the ER600 Softside Waterbed Mattress. It responds to your weight and position for perfect comfort without disturbing your partner. Lumbar Support Back pain makes it hard to shop for a bed, but not at Sterling. The ER600 Softside Waterbed Mattress with back support eliminates back pain without sacrificing comfort. Super Waveless Wave reduction is crucial to achieving a good night’s sleep. Our Super Waveless ER600 is an 8” water bladder with a wave-eliminating tether system to minimize any unwanted ocean motion.

$352.80 ER9254 Waveless, Back Support, Softside Waterbed Mattress, Deep Fill (8")- 2nd Most Waveless - Queen 60in x 80in / Single Designed for the average sleeper, this waveless deep fill model offers a strategically placed lumbar support layer to help eliminate sleep-related back pain. The Sterling Endura III PVS... read more Designed for the average sleeper, this waveless deep fill model offers a strategically placed lumbar support layer to help eliminate sleep-related back pain. The Sterling Endura III PVS structure and tethered wave control system help you and your partner fall asleep and stay asleep. Lumbar Support An added support layer across the lumbar region supports the lower curvature of your spine to keep you pain-free throughout the night. Wave Control Our tethered wave control system minimizes motion and transference so you can fall asleep faster and stay asleep longer without waking your partner. 3 Full-Size Layers The lumbar layer and water bladder are situated between three full-size, 1.5-ounce fiber layers that provide additional support. Deep Bladder 8” A deep water bladder ensures plenty of water between the 1.5-ounce fiber layers to keep you supported and comfortable.

$441.00 ER9256 Super Waveless, Back Support, Softside Waterbed Mattress, Deep Fill (8")- Most Waveless You don’t have to sacrifice total comfort for back support. Our most waveless mattress gives you both! The 8” water bladder rests between four full-sized layers of 1.5-ounce... read more You don’t have to sacrifice total comfort for back support. Our most waveless mattress gives you both! The 8” water bladder rests between four full-sized layers of 1.5-ounce fiber with two layers of lumbar support right where you need it. The tethered wave control system and Sterling Endura III PVC structure minimize motion so you can fall asleep fast and stay asleep through the night. Cloud Comfort The ER9256 Waveless Softside Waterbed Mattress is an engineering masterpiece that combines the cradling comfort of a water bladder with supportive internal and external structures. Lumbar Support One of the most essential features of a mattress is how well it supports your back. The ER9256 supports the correct curvature of your entire spine with a double layer of lumbar support. Most Waveless The problem with traditional waterbeds is the motion that tosses you around while you’re trying to get comfortable and sleep. The ER9256 is structured to minimize waves for undisturbed slumber. Deep Fill The water bladder in the ER9256 is eight inches deep, providing you and your sleep partner with one of the most comfortable and contouring water mattress experiences available.

Step 3 of 7: Eastern King Bladders

Choose the bladder you want for your bed.

$604.20 ER400 Super Waveless, Back Support, Softside Waterbed Mattress, Deep Fill (8")- 2nd most waveless The third layer of lumbar support in the ER400 makes it one of our most popular models. Most sleepers struggle with back pain on mattresses that are too... read more The third layer of lumbar support in the ER400 makes it one of our most popular models. Most sleepers struggle with back pain on mattresses that are too soft and body aches on beds that are too firm. This super waveless model gives you extra support where you need it and responsive cradling where you don’t. Three Lumbar Layers As sleep system designers, we take back pain seriously. You don’t have to accept inadequate support. The ER400 will cradle the natural curvature of your spine with three lumbar layers to eliminate your pain. Four Full-Size Layers Four 1.5-ounce fiber layers envelop the water bladder to provide structure, stability, and dreamy comfort. You’ll feel weightless and serene atop our most popular model and wake up feeling energized. Super Waveless The seven layers and tethering system of the ER400 Softside Waterbed Mattress minimize motion so you can get comfortable faster, sleep through the night, and avoid disturbing your partner. Deep Bladder 8” Why choose a deep water bladder? You want to sleep like a weightless baby on plush, cloud-like comfort, and that requires more than six inches of water. If you’re looking for more firmness, try our mid-fill. The Real Benefit Unlike foam beds in a box, innerspring beds or air beds, waterbeds never get softer with time. The level of support you feel the very first night, is the same level of comfort you will get 5, 10, 15 years or beyond from now, making waterbeds right right choice for most sleepers. While most traditional beds may only last 8-10 years, our waterbeds are able to remain in use up to 30 years with proper care.

$739.20 ER600 Super Waveless, Edge Support, Back Support, Softside Waterbed Mattress, Deep Fill (8") The ER600’s distinguishing feature is its Progressive Rate Spring (US Patent #4905331). This system adjusts to your weight and position to cushion your pressure points and perfectly support... read more The ER600’s distinguishing feature is its Progressive Rate Spring (US Patent #4905331). This system adjusts to your weight and position to cushion your pressure points and perfectly support your lumbar region, eliminating the dreaded droop that causes back pain. Sleep through the night without disturbing your partner on a mattress that’s never too soft or too firm. Edge Support Our patented edge support system maintains a slightly firmer border compared to the middle of your mattress, keeping you in your perfect sleep position all night. Individualized Comfort The Progressive Rate Spring is a panted support system inside the ER600 Softside Waterbed Mattress. It responds to your weight and position for perfect comfort without disturbing your partner. Lumbar Support Back pain makes it hard to shop for a bed, but not at Sterling. The ER600 Softside Waterbed Mattress with back support eliminates back pain without sacrificing comfort. Super Waveless Wave reduction is crucial to achieving a good night’s sleep. Our Super Waveless ER600 is an 8” water bladder with a wave-eliminating tether system to minimize any unwanted ocean motion.

$352.80 ER9254 Waveless, Back Support, Softside Waterbed Mattress, Deep Fill (8")- 2nd Most Waveless - Eastern King 76in x 80in / Single Designed for the average sleeper, this waveless deep fill model offers a strategically placed lumbar support layer to help eliminate sleep-related back pain. The Sterling Endura III PVS... read more Designed for the average sleeper, this waveless deep fill model offers a strategically placed lumbar support layer to help eliminate sleep-related back pain. The Sterling Endura III PVS structure and tethered wave control system help you and your partner fall asleep and stay asleep. Lumbar Support An added support layer across the lumbar region supports the lower curvature of your spine to keep you pain-free throughout the night. Wave Control Our tethered wave control system minimizes motion and transference so you can fall asleep faster and stay asleep longer without waking your partner. 3 Full-Size Layers The lumbar layer and water bladder are situated between three full-size, 1.5-ounce fiber layers that provide additional support. Deep Bladder 8” A deep water bladder ensures plenty of water between the 1.5-ounce fiber layers to keep you supported and comfortable.

$441.00 ER9256 Super Waveless, Back Support, Softside Waterbed Mattress, Deep Fill (8")- Most Waveless You don’t have to sacrifice total comfort for back support. Our most waveless mattress gives you both! The 8” water bladder rests between four full-sized layers of 1.5-ounce... read more You don’t have to sacrifice total comfort for back support. Our most waveless mattress gives you both! The 8” water bladder rests between four full-sized layers of 1.5-ounce fiber with two layers of lumbar support right where you need it. The tethered wave control system and Sterling Endura III PVC structure minimize motion so you can fall asleep fast and stay asleep through the night. Cloud Comfort The ER9256 Waveless Softside Waterbed Mattress is an engineering masterpiece that combines the cradling comfort of a water bladder with supportive internal and external structures. Lumbar Support One of the most essential features of a mattress is how well it supports your back. The ER9256 supports the correct curvature of your entire spine with a double layer of lumbar support. Most Waveless The problem with traditional waterbeds is the motion that tosses you around while you’re trying to get comfortable and sleep. The ER9256 is structured to minimize waves for undisturbed slumber. Deep Fill The water bladder in the ER9256 is eight inches deep, providing you and your sleep partner with one of the most comfortable and contouring water mattress experiences available.

Step 3 of 7: Full Bladders

Choose the bladder you want for your bed.

$352.80 ER9254 Waveless, Back Support, Softside Waterbed Mattress, Deep Fill (8")- 2nd Most Waveless - Full 54in x 75in / Single Designed for the average sleeper, this waveless deep fill model offers a strategically placed lumbar support layer to help eliminate sleep-related back pain. The Sterling Endura III PVS... read more Designed for the average sleeper, this waveless deep fill model offers a strategically placed lumbar support layer to help eliminate sleep-related back pain. The Sterling Endura III PVS structure and tethered wave control system help you and your partner fall asleep and stay asleep. Lumbar Support An added support layer across the lumbar region supports the lower curvature of your spine to keep you pain-free throughout the night. Wave Control Our tethered wave control system minimizes motion and transference so you can fall asleep faster and stay asleep longer without waking your partner. 3 Full-Size Layers The lumbar layer and water bladder are situated between three full-size, 1.5-ounce fiber layers that provide additional support. Deep Bladder 8” A deep water bladder ensures plenty of water between the 1.5-ounce fiber layers to keep you supported and comfortable.

Step 3 of 7: Twin Bladders

Choose the bladder you want for your bed.

$352.80 ER9254 Waveless, Back Support, Softside Waterbed Mattress, Deep Fill (8")- 2nd Most Waveless - Twin 38in x 75in / Single Designed for the average sleeper, this waveless deep fill model offers a strategically placed lumbar support layer to help eliminate sleep-related back pain. The Sterling Endura III PVS... read more Designed for the average sleeper, this waveless deep fill model offers a strategically placed lumbar support layer to help eliminate sleep-related back pain. The Sterling Endura III PVS structure and tethered wave control system help you and your partner fall asleep and stay asleep. Lumbar Support An added support layer across the lumbar region supports the lower curvature of your spine to keep you pain-free throughout the night. Wave Control Our tethered wave control system minimizes motion and transference so you can fall asleep faster and stay asleep longer without waking your partner. 3 Full-Size Layers The lumbar layer and water bladder are situated between three full-size, 1.5-ounce fiber layers that provide additional support. Deep Bladder 8” A deep water bladder ensures plenty of water between the 1.5-ounce fiber layers to keep you supported and comfortable.

Step 4 of 7: Heater Selection (Single)

Choose which heater you want. You can select up to 2 or you do not have to select one at all, just click "Next" to continue to the next step.

$99.00 Waterbed Heater, 6" Mid Fill & Tubes: Solid-State 170Watt, not for deep fill waterbeds Dual waterbed bladder? Buy two to heat both sides. Note: Designed for 3.5" Tube beds. Do not use with 8" - 9" fill depth. Waterbed Heater Instructions Solid State waterbed Heaters... read more Dual waterbed bladder? Buy two to heat both sides. Note: Designed for 3.5" Tube beds. Do not use with 8" - 9" fill depth. Waterbed Heater Instructions Solid State waterbed Heaters by Backer Heating Technologies of Sweden are the safest best designed heaters on the market today. Made in Europe to exacting standards these etched copper foil low watt density heater pads feature soldered copper to copper power cord connections. Etched foil copper circuits deliver superior heat distribution. When you purchase Backer Heating Technologies you get Swedish quality and safety. The precision solid state temperature controls will deliver years of trouble free service. Backer Heating Technologies makes the best waterbed heater available in our opinion at any price. Safe and Reliable Backer Heating Technologies has been in the heater making business for 30 years, 20 of them as a supplier of waterbed heaters to the European market, as well as having become a world leader by supplying over 20 million heaters per year to the Automotive Industry across the globe. Our design and manufacturing capabilities are driven by a philosophy of excellence, utilizing most stringent standards to test and engineer in the highest quality and safety features for your heating needs. Easy Installation Install the heater pad right side up, under the safety liner. Remove wrinkles in the mattress and liner over the heater pad. Locate the heater pad so that blankets or sheets will not be tucked in over the heater pad. Place the heater pad on a firm flat surface, not over cracks or across the gap between deck boards or split foundation bases Easy to Use You can check or change the temperature setting on your control box even in the middle of the night. When your Backer Heating Technologies heater is creating warmth, a small diode is lit., telling you the unit is in heating mode. By turning the knob, you can adjust the temperature setting. The small control unit is integrated with the heater making it watertight, and there are no extra cords to worry about or try to reach in the dark. ONE PLUG AND YOUR SNUG! Temperature Selection Once you select and set the Backer Heating Technologies electronic thermostat, the Control Unit maintains the water temperature within +/- 1 degree F, i room temp, to keep you cozy and comfortable until you decide to change it. The Control Unit monitors your comfort level and maintains the life of your mattress. Our solid state construction prevents those "clicking" noises so irritating in old mechanical style heaters. And with no moving parts in the temperature control unit, the expected lifetime and accuracy is greater than most competition models. Patented Circuit Design The Backer Heating Technologies Waterbed heater, with its patented circuit design and generous polyester insulation operates with one of the lowest electromagnetic fields available on the market today Highest International Standards Both the heater and control unit have been designed to UL 1445 standards and certified by ETL for USA and Canada. Backer Heating Technologies Foil adheres to ISO 9000:2000 standards to ensure quality is maintained in production and testing of our products. Control Unit The smaller design of the solid state Backer Heating Technologies control unit allows for passage through most waterbed frame with ease. Our unique control system is designed for greater comfort and lower energy consumption. The control unit is designed to resist electrical spies up to 1500V. *Note: The control unit does generate some heat and should NOT BE LEFT in contact with the mattress. Longer Life The patented design of the Backer Heating Technologies Waterbed Heater maintains low, even surface temperature and low thermal expansion -prolonging the life of the heater and the mattress. Backer Heating Technologies heating elements have been tested according to UL 1445 standards and CSA C22.2 No.200 standards. Overheat Protection Backer Heating Technologies elements are protected again overheating by an automatic cut-off which is actuated by abnormal circumstances. PLEASE NOTE THAT DURING EMPTYING OR FILLING THE WATERBED. THE ELEMENT MUST BE UNPLUGGED. Limited Warranty Backer Heating Technologies heaters are covered by a 5 year limited, warranty to the original purchaser against product failure due to defects that are the result of labor or material. Damage that is the result of improper installation or customer abuse is not covered. Warranty covers product replacement only and is exclusive of freight charges or subsequent damage. The factory reserves the right to inspect the product before making the final determination.

$99.00 Waterbed Heater, 8" & 9" Deep-Fill: Solid-State 325W In Stock in limited quantities! Dual waterbed bladder? Buy two waterbed heaters (to heat both sides). Note: Do not use with 3.5" Tube beds. Designed for... read more In Stock in limited quantities! Dual waterbed bladder? Buy two waterbed heaters (to heat both sides). Note: Do not use with 3.5" Tube beds. Designed for 8" - 9" fill depth mattresses only. Waterbed Heater Instructions Solid state waterbed heaters by Backer Heating Technologies of Sweden are the safest, best designed heaters on the market today. Made in Europe to exacting standards these etched copper foil low watt density heater pads feature soldered copper to copper power cord connections. Etched foil copper circuits deliver superior heat distribution. When you purchase Backer Heating Technologies you get Swedish quality and safety. The precision solid state temperature controls will deliver years of trouble free service. Backer Heating Technologies makes the best waterbed heater available in our opinion at any price. Safe and Reliable Backer Heating Technologies has been in the heater making business for 30 years, 20 of them as a supplier of waterbed heaters to the European market, as well as having become a world leader by supplying over 20 million heaters per year to the Automotive Industry across the globe. Our design and manufacturing capabilities are driven by a philosophy of excellence, utilizing most stringent standards to test and engineer in the highest quality and safety features for your heating needs. Easy Installation Install the heater pad right side up, under the safety liner. Remove wrinkles in the mattress and liner over the heater pad. Locate the heater pad so that blankets or sheets will not be tucked in over the heater pad. Place the heater pad on a firm flat surface, not over cracks or across the gap between deck boards or split foundation bases Easy to Use You can check or change the temperature setting on your control box even in the middle of the night. When your Backer Heating Technologies heater is creating warmth, a small diode is lit., telling you the unit is in heating mode. By turning the knob, you can adjust the temperature setting. The small control unit is integrated with the heater making it watertight, and there are no extra cords to worry about or try to reach in the dark. ONE PLUG AND YOUR SNUG! Temperature Selection Once you select and set the Backer Heating Technologies electronic thermostat, the Control Unit maintains the water temperature within +/- 1 degree F, i room temp, to keep you cozy and comfortable until you decide to change it. The Control Unit monitors your comfort level and maintains the life of your mattress. Our solid state construction prevents those "clicking" noises so irritating in old mechanical style heaters. And with no moving parts in the temperature control unit, the expected lifetime and accuracy is greater than most competition models. Patented Circuit Design The Backer Heating Technologies Waterbed heater, with its patented circuit design and generous polyester insulation operates with one of the lowest electromagnetic fields available on the market today Highest International Standards Both the heater and control unit have been designed to UL 1445 standards and certified by ETL for USA and Canada. Backer Heating Technologies Foil adheres to ISO 9000:2000 standards to ensure quality is maintained in production and testing of our products. Control Unit The smaller design of the solid state Backer Heating Technologies control unit allows for passage through most waterbed frame gs with ease. Our unique control system is designed for greater comfort and lower energy consumption. The control unit is designed to resist electrical spies up to 1500V. *Note: The control unit does generate some heat and should NOT BE LEFT in contact with the mattress. Longer Life The patented design of the Backer Heating Technologies Waterbed Heater maintains low, even surface temperature and low thermal expansion -prolonging the life of the heater and the mattress. Backer Heating Technologies heating elements have been tested according to UL 1445 standards and CSA C22.2 No.200 standards. Overheat Protection Backer Heating Technologies elements are protected again overheating by an automatic cut-off which is actuated by abnormal circumstances. PLEASE NOTE THAT DURING EMPTYING OR FILLING THE WATERBED. THE ELEMENT MUST BE UNPLUGGED. Limited Warranty Backer Heating Technologies heaters are covered by a 5 year limited, warranty to the original purchaser against product failure due to defects that are the result of labor or material. Damage that is the result of improper installation or customer abuse is not covered. Warranty covers product replacement only and is exclusive of freight charges or subsequent damage. The factory reserves the right to inspect the product before making the final determination.

Step 4 of 7: Heater Selection (Dual)

Choose which heater you want. You can select up to 2 or you do not have to select one at all, just click "Next" to continue to the next step.

$198.00 Dual Waterbed Heater, 8" Deep-Fill: Solid-State 325W In Stock in limited quantities!! Dual waterbed bladder to heat both sides of your softside waterbed? This product contains 2 seperate heaters for 1 price. Note: Do not... read more In Stock in limited quantities!! Dual waterbed bladder to heat both sides of your softside waterbed? This product contains 2 seperate heaters for 1 price. Note: Do not use with 3.5" Tube beds. Designed for 8" - 9" fill depth mattresses only. Waterbed Heater Instructions Solid state waterbed heaters by Backer Heating Technologies of Sweden are the safest, best designed heaters on the market today. Made in Europe to exacting standards these etched copper foil low watt density heater pads feature soldered copper to copper power cord connections. Etched foil copper circuits deliver superior heat distribution. When you purchase Backer Heating Technologies you get Swedish quality and safety. The precision solid state temperature controls will deliver years of trouble free service. Backer Heating Technologies makes the best waterbed heater available in our opinion at any price. Safe and Reliable Backer Heating Technologies has been in the heater making business for 30 years, 20 of them as a supplier of waterbed heaters to the European market, as well as having become a world leader by supplying over 20 million heaters per year to the Automotive Industry across the globe. Our design and manufacturing capabilities are driven by a philosophy of excellence, utilizing most stringent standards to test and engineer in the highest quality and safety features for your heating needs. Easy Installation Install the heater pad right side up, under the safety liner. Remove wrinkles in the mattress and liner over the heater pad. Locate the heater pad so that blankets or sheets will not be tucked in over the heater pad. Place the heater pad on a firm flat surface, not over cracks or across the gap between deck boards or split foundation bases Easy to Use You can check or change the temperature setting on your control box even in the middle of the night. When your Backer Heating Technologies heater is creating warmth, a small diode is lit., telling you the unit is in heating mode. By turning the knob, you can adjust the temperature setting. The small control unit is integrated with the heater making it watertight, and there are no extra cords to worry about or try to reach in the dark. ONE PLUG AND YOUR SNUG! Temperature Selection Once you select and set the Backer Heating Technologies electronic thermostat, the Control Unit maintains the water temperature within +/- 1 degree F, i room temp, to keep you cozy and comfortable until you decide to change it. The Control Unit monitors your comfort level and maintains the life of your mattress. Our solid state construction prevents those "clicking" noises so irritating in old mechanical style heaters. And with no moving parts in the temperature control unit, the expected lifetime and accuracy is greater than most competition models. Patented Circuit Design The Backer Heating Technologies Waterbed heater, with its patented circuit design and generous polyester insulation operates with one of the lowest electromagnetic fields available on the market today Highest International Standards Both the heater and control unit have been designed to UL 1445 standards and certified by ETL for USA and Canada. Backer Heating Technologies Foil adheres to ISO 9000:2000 standards to ensure quality is maintained in production and testing of our products. Control Unit The smaller design of the solid state Backer Heating Technologies control unit allows for passage through most waterbed frame gs with ease. Our unique control system is designed for greater comfort and lower energy consumption. The control unit is designed to resist electrical spies up to 1500V. *Note: The control unit does generate some heat and should NOT BE LEFT in contact with the mattress. Longer Life The patented design of the Backer Heating Technologies Waterbed Heater maintains low, even surface temperature and low thermal expansion -prolonging the life of the heater and the mattress. Backer Heating Technologies heating elements have been tested according to UL 1445 standards and CSA C22.2 No.200 standards. Overheat Protection Backer Heating Technologies elements are protected again overheating by an automatic cut-off which is actuated by abnormal circumstances. PLEASE NOTE THAT DURING EMPTYING OR FILLING THE WATERBED. THE ELEMENT MUST BE UNPLUGGED. Limited Warranty Backer Heating Technologies heaters are covered by a 5 year limited, warranty to the original purchaser against product failure due to defects that are the result of labor or material. Damage that is the result of improper installation or customer abuse is not covered. Warranty covers product replacement only and is exclusive of freight charges or subsequent damage. The factory reserves the right to inspect the product before making the final determination.

$99.00 Waterbed Heater, 6" Mid Fill & Tubes: Solid-State 170Watt, not for deep fill waterbeds Dual waterbed bladder? Buy two to heat both sides. Note: Designed for 3.5" Tube beds. Do not use with 8" - 9" fill depth. Waterbed Heater Instructions Solid State waterbed Heaters... read more Dual waterbed bladder? Buy two to heat both sides. Note: Designed for 3.5" Tube beds. Do not use with 8" - 9" fill depth. Waterbed Heater Instructions Solid State waterbed Heaters by Backer Heating Technologies of Sweden are the safest best designed heaters on the market today. Made in Europe to exacting standards these etched copper foil low watt density heater pads feature soldered copper to copper power cord connections. Etched foil copper circuits deliver superior heat distribution. When you purchase Backer Heating Technologies you get Swedish quality and safety. The precision solid state temperature controls will deliver years of trouble free service. Backer Heating Technologies makes the best waterbed heater available in our opinion at any price. Safe and Reliable Backer Heating Technologies has been in the heater making business for 30 years, 20 of them as a supplier of waterbed heaters to the European market, as well as having become a world leader by supplying over 20 million heaters per year to the Automotive Industry across the globe. Our design and manufacturing capabilities are driven by a philosophy of excellence, utilizing most stringent standards to test and engineer in the highest quality and safety features for your heating needs. Easy Installation Install the heater pad right side up, under the safety liner. Remove wrinkles in the mattress and liner over the heater pad. Locate the heater pad so that blankets or sheets will not be tucked in over the heater pad. Place the heater pad on a firm flat surface, not over cracks or across the gap between deck boards or split foundation bases Easy to Use You can check or change the temperature setting on your control box even in the middle of the night. When your Backer Heating Technologies heater is creating warmth, a small diode is lit., telling you the unit is in heating mode. By turning the knob, you can adjust the temperature setting. The small control unit is integrated with the heater making it watertight, and there are no extra cords to worry about or try to reach in the dark. ONE PLUG AND YOUR SNUG! Temperature Selection Once you select and set the Backer Heating Technologies electronic thermostat, the Control Unit maintains the water temperature within +/- 1 degree F, i room temp, to keep you cozy and comfortable until you decide to change it. The Control Unit monitors your comfort level and maintains the life of your mattress. Our solid state construction prevents those "clicking" noises so irritating in old mechanical style heaters. And with no moving parts in the temperature control unit, the expected lifetime and accuracy is greater than most competition models. Patented Circuit Design The Backer Heating Technologies Waterbed heater, with its patented circuit design and generous polyester insulation operates with one of the lowest electromagnetic fields available on the market today Highest International Standards Both the heater and control unit have been designed to UL 1445 standards and certified by ETL for USA and Canada. Backer Heating Technologies Foil adheres to ISO 9000:2000 standards to ensure quality is maintained in production and testing of our products. Control Unit The smaller design of the solid state Backer Heating Technologies control unit allows for passage through most waterbed frame with ease. Our unique control system is designed for greater comfort and lower energy consumption. The control unit is designed to resist electrical spies up to 1500V. *Note: The control unit does generate some heat and should NOT BE LEFT in contact with the mattress. Longer Life The patented design of the Backer Heating Technologies Waterbed Heater maintains low, even surface temperature and low thermal expansion -prolonging the life of the heater and the mattress. Backer Heating Technologies heating elements have been tested according to UL 1445 standards and CSA C22.2 No.200 standards. Overheat Protection Backer Heating Technologies elements are protected again overheating by an automatic cut-off which is actuated by abnormal circumstances. PLEASE NOTE THAT DURING EMPTYING OR FILLING THE WATERBED. THE ELEMENT MUST BE UNPLUGGED. Limited Warranty Backer Heating Technologies heaters are covered by a 5 year limited, warranty to the original purchaser against product failure due to defects that are the result of labor or material. Damage that is the result of improper installation or customer abuse is not covered. Warranty covers product replacement only and is exclusive of freight charges or subsequent damage. The factory reserves the right to inspect the product before making the final determination.

$99.00 Waterbed Heater, 8" & 9" Deep-Fill: Solid-State 325W In Stock in limited quantities! Dual waterbed bladder? Buy two waterbed heaters (to heat both sides). Note: Do not use with 3.5" Tube beds. Designed for... read more In Stock in limited quantities! Dual waterbed bladder? Buy two waterbed heaters (to heat both sides). Note: Do not use with 3.5" Tube beds. Designed for 8" - 9" fill depth mattresses only. Waterbed Heater Instructions Solid state waterbed heaters by Backer Heating Technologies of Sweden are the safest, best designed heaters on the market today. Made in Europe to exacting standards these etched copper foil low watt density heater pads feature soldered copper to copper power cord connections. Etched foil copper circuits deliver superior heat distribution. When you purchase Backer Heating Technologies you get Swedish quality and safety. The precision solid state temperature controls will deliver years of trouble free service. Backer Heating Technologies makes the best waterbed heater available in our opinion at any price. Safe and Reliable Backer Heating Technologies has been in the heater making business for 30 years, 20 of them as a supplier of waterbed heaters to the European market, as well as having become a world leader by supplying over 20 million heaters per year to the Automotive Industry across the globe. Our design and manufacturing capabilities are driven by a philosophy of excellence, utilizing most stringent standards to test and engineer in the highest quality and safety features for your heating needs. Easy Installation Install the heater pad right side up, under the safety liner. Remove wrinkles in the mattress and liner over the heater pad. Locate the heater pad so that blankets or sheets will not be tucked in over the heater pad. Place the heater pad on a firm flat surface, not over cracks or across the gap between deck boards or split foundation bases Easy to Use You can check or change the temperature setting on your control box even in the middle of the night. When your Backer Heating Technologies heater is creating warmth, a small diode is lit., telling you the unit is in heating mode. By turning the knob, you can adjust the temperature setting. The small control unit is integrated with the heater making it watertight, and there are no extra cords to worry about or try to reach in the dark. ONE PLUG AND YOUR SNUG! Temperature Selection Once you select and set the Backer Heating Technologies electronic thermostat, the Control Unit maintains the water temperature within +/- 1 degree F, i room temp, to keep you cozy and comfortable until you decide to change it. The Control Unit monitors your comfort level and maintains the life of your mattress. Our solid state construction prevents those "clicking" noises so irritating in old mechanical style heaters. And with no moving parts in the temperature control unit, the expected lifetime and accuracy is greater than most competition models. Patented Circuit Design The Backer Heating Technologies Waterbed heater, with its patented circuit design and generous polyester insulation operates with one of the lowest electromagnetic fields available on the market today Highest International Standards Both the heater and control unit have been designed to UL 1445 standards and certified by ETL for USA and Canada. Backer Heating Technologies Foil adheres to ISO 9000:2000 standards to ensure quality is maintained in production and testing of our products. Control Unit The smaller design of the solid state Backer Heating Technologies control unit allows for passage through most waterbed frame gs with ease. Our unique control system is designed for greater comfort and lower energy consumption. The control unit is designed to resist electrical spies up to 1500V. *Note: The control unit does generate some heat and should NOT BE LEFT in contact with the mattress. Longer Life The patented design of the Backer Heating Technologies Waterbed Heater maintains low, even surface temperature and low thermal expansion -prolonging the life of the heater and the mattress. Backer Heating Technologies heating elements have been tested according to UL 1445 standards and CSA C22.2 No.200 standards. Overheat Protection Backer Heating Technologies elements are protected again overheating by an automatic cut-off which is actuated by abnormal circumstances. PLEASE NOTE THAT DURING EMPTYING OR FILLING THE WATERBED. THE ELEMENT MUST BE UNPLUGGED. Limited Warranty Backer Heating Technologies heaters are covered by a 5 year limited, warranty to the original purchaser against product failure due to defects that are the result of labor or material. Damage that is the result of improper installation or customer abuse is not covered. Warranty covers product replacement only and is exclusive of freight charges or subsequent damage. The factory reserves the right to inspect the product before making the final determination.

Step 5 of 7: Full Foundation

Choose the foundation you want. You do not have to select one, Choose which heater you want. You can select up to 2 or you do not have to select one at all, just click "Next" to continue to the next step.

$526.20 4" Mattress Foundation: Softside Waterbeds and Silver Lining Mattress - Full 54in x 75in (Double) Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

$526.20 8" Mattress Foundations: Softside Waterbeds and Silver Lining Mattress - Full 54in x 75in (Double) Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

$526.20 9" Mattress Foundation: Softside Waterbeds and Silver Lining Mattress - Full 54in x 75in (Double) Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

Step 5 of 7: Twin Foundation

Choose the foundation you want. You do not have to select one, Choose which heater you want. You can select up to 2 or you do not have to select one at all, just click "Next" to continue to the next step.

$417.60 4" Mattress Foundation: Softside Waterbeds and Silver Lining Mattress - Twin XL 38in x 80in Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

$417.60 8" Mattress Foundations: Softside Waterbeds and Silver Lining Mattress - Twin 38in x 75in Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

$417.60 9" Mattress Foundation: Softside Waterbeds and Silver Lining Mattress - Twin 38in x 75in Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

Step 5 of 7: Queen Foundation

Choose the foundation you want. You do not have to select one, Choose which heater you want. You can select up to 2 or you do not have to select one at all, just click "Next" to continue to the next step.

$568.20 4" Mattress Foundation: Softside Waterbeds and Silver Lining Mattress - Queen 60in x 80in Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

$568.20 8" Mattress Foundations: Softside Waterbeds and Silver Lining Mattress - Queen 60in x 80in Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

$568.20 9" Mattress Foundation: Softside Waterbeds and Silver Lining Mattress - Queen 60in x 80in Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

Step 5 of 7: California Foundation

Choose the foundation you want. You do not have to select one, Choose which heater you want. You can select up to 2 or you do not have to select one at all, just click "Next" to continue to the next step.

$936.00 4" Mattress Foundation: Softside Waterbeds and Silver Lining Mattress - California King 72in x 84in Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

$936.00 8" Mattress Foundations: Softside Waterbeds and Silver Lining Mattress - California King 72in x 84in Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

$936.00 9" Mattress Foundation: Softside Waterbeds and Silver Lining Mattress - California King 72in x 84in Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

Step 5 of 7: Eastern King Foundation

Choose the foundation you want. You do not have to select one, Choose which heater you want. You can select up to 2 or you do not have to select one at all, just click "Next" to continue to the next step.

$936.00 4" Mattress Foundation: Softside Waterbeds and Silver Lining Mattress - Eastern King 76in x 80in Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

$936.00 8" Mattress Foundations: Softside Waterbeds and Silver Lining Mattress - Eastern King 76in x 80in Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

$936.00 9" Mattress Foundation: Softside Waterbeds and Silver Lining Mattress - Eastern King 76in x 80in Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a... read more Mattress support is only as good as the platform it is sitting on. You cant expect your mattress to support you, if your mattress is on a flexible surface like a metal box spring. Over time, that flexible boxspring can cause your mattress to wear out faster, causing you to have to buy a new mattress a lot sooner than you probably want. That is why Sterling Sleep Systems has always used box foundations with every mattress we manufacture. They are designed to support the weight of a waterbed, which makes them ideal to support your Innerspring, Latex or Waterbed System. By offering this type of foundation, we are able to properly support our mattresses, to ensure they give you the support you need, and the best night sleep possible.

Step 6 of 7: Twin Frame

Select the frame you want. You do not have to select one, Choose which heater you want. You can select up to 2 or you do not have to select one at all, just click "Next" to continue to the next step.

$187.20 Heavy Duty 9-legged Metal Bed Frame, with Headboard Brackets - Twin XL 38in x 80in Shipping charge may apply if this item is ordered by itself. Sterling will contact you if a shipping charge is required. Made by Glide-Away Suitable for: latex mattresses,... read more Shipping charge may apply if this item is ordered by itself. Sterling will contact you if a shipping charge is required. Made by Glide-Away Suitable for: latex mattresses, memory foam mattresses, innerspring mattress and waterbeds. This sturdy steel bed frame with 9 legs (queen and king sizes only) with glides makes certain that your bed is well supported. Many mattress warranties require proper support to remain valid. The frame holds over 1000 pounds of weight and comes with headboard brackets to mount to virtually all headboards. The bed frame accommodates standard or extra length beds.

Step 6 of 7: Full Frame

Select the frame you want. You do not have to select one, Choose which heater you want. You can select up to 2 or you do not have to select one at all, just click "Next" to continue to the next step.

$199.80 Heavy Duty 9-legged Metal Bed Frame, with Headboard Brackets - Full 54in x 75in (Double) Shipping charge may apply if this item is ordered by itself. Sterling will contact you if a shipping charge is required. Made by Glide-Away Suitable for: latex mattresses,... read more Shipping charge may apply if this item is ordered by itself. Sterling will contact you if a shipping charge is required. Made by Glide-Away Suitable for: latex mattresses, memory foam mattresses, innerspring mattress and waterbeds. This sturdy steel bed frame with 9 legs (queen and king sizes only) with glides makes certain that your bed is well supported. Many mattress warranties require proper support to remain valid. The frame holds over 1000 pounds of weight and comes with headboard brackets to mount to virtually all headboards. The bed frame accommodates standard or extra length beds.

Step 6 of 7: Queen Frame

Select the frame you want. You do not have to select one, Choose which heater you want. You can select up to 2 or you do not have to select one at all, just click "Next" to continue to the next step.

$225.60 Heavy Duty 9-legged Metal Bed Frame, with Headboard Brackets - Queen 60in x 80in Shipping charge may apply if this item is ordered by itself. Sterling will contact you if a shipping charge is required. Made by Glide-Away Suitable for: latex mattresses,... read more Shipping charge may apply if this item is ordered by itself. Sterling will contact you if a shipping charge is required. Made by Glide-Away Suitable for: latex mattresses, memory foam mattresses, innerspring mattress and waterbeds. This sturdy steel bed frame with 9 legs (queen and king sizes only) with glides makes certain that your bed is well supported. Many mattress warranties require proper support to remain valid. The frame holds over 1000 pounds of weight and comes with headboard brackets to mount to virtually all headboards. The bed frame accommodates standard or extra length beds.

Step 6 of 7: California Frame

Select the frame you want. You do not have to select one, Choose which heater you want. You can select up to 2 or you do not have to select one at all, just click "Next" to continue to the next step.

$264.60 Heavy Duty 9-legged Metal Bed Frame, with Headboard Brackets - California King 72in x 84in Shipping charge may apply if this item is ordered by itself. Sterling will contact you if a shipping charge is required. Made by Glide-Away Suitable for: latex mattresses,... read more Shipping charge may apply if this item is ordered by itself. Sterling will contact you if a shipping charge is required. Made by Glide-Away Suitable for: latex mattresses, memory foam mattresses, innerspring mattress and waterbeds. This sturdy steel bed frame with 9 legs (queen and king sizes only) with glides makes certain that your bed is well supported. Many mattress warranties require proper support to remain valid. The frame holds over 1000 pounds of weight and comes with headboard brackets to mount to virtually all headboards. The bed frame accommodates standard or extra length beds.

Step 6 of 7: Eastern Frame

Select the frame you want. You do not have to select one, Choose which heater you want. You can select up to 2 or you do not have to select one at all, just click "Next" to continue to the next step.

$264.60 Heavy Duty 9-legged Metal Bed Frame, with Headboard Brackets - Eastern King 76in x 80in Shipping charge may apply if this item is ordered by itself. Sterling will contact you if a shipping charge is required. Made by Glide-Away Suitable for: latex mattresses,... read more Shipping charge may apply if this item is ordered by itself. Sterling will contact you if a shipping charge is required. Made by Glide-Away Suitable for: latex mattresses, memory foam mattresses, innerspring mattress and waterbeds. This sturdy steel bed frame with 9 legs (queen and king sizes only) with glides makes certain that your bed is well supported. Many mattress warranties require proper support to remain valid. The frame holds over 1000 pounds of weight and comes with headboard brackets to mount to virtually all headboards. The bed frame accommodates standard or extra length beds.

Step 7 of 7: Accessories

Choose any accessories that you would like. You do not have to select one, Choose which heater you want. You can select up to 2 or you do not have to select one at all, just click "Next" to continue to the next step.

- $18.95 +

8 oz. Water Conditioner- 2-Pack 2- 8 oz. bottles with a child-resistant safety cap. Free shipping in the US (US Priority Mail).* This Sterling exclusive product conditions and treats the vinyl and... read more 2- 8 oz. bottles with a child-resistant safety cap. Free shipping in the US (US Priority Mail).* This Sterling exclusive product conditions and treats the vinyl and fiber inside of your waterbed. It reduces the build-up of of air in your waterbed over time, and conditions waterbed vinyl, fiber and foam. Designed by the same chemists that created Blue Magic Waterbed conditioner, it has been designed to exceed the performance of both Blue Magic and Sapphire Collection Water conditioners. * Applies to conditioner order placed by themselves. If ordered as part of a larger order, it will be added to the other boxes, not shipped separately.

- $10.98 +

Fill Drain Kit Sterling Waterbed Fill and Drain Kit contains the adapters needed to fill and drain your waterbed. Connect your hose to a bathroom sink with the faucet adapter, and connect... read more Sterling Waterbed Fill and Drain Kit contains the adapters needed to fill and drain your waterbed. Connect your hose to a bathroom sink with the faucet adapter, and connect the hose adapter to the mattress fill valve. The Fill and Drain Kit is water powered (the "Venturi Pump"). Have a waterbed heater? Be certain to unplug the element when filling and draining. Note: the Waterbed Fill and Drain Kit does not contain a water conditioner.

- $10.98 +

Patch Kit Free shipping in the US (US Priority Mail). Super holding, fast acting adhesive patch kit for waterbed bladders. That's what you need to make mattress repairs quickly and... read more Free shipping in the US (US Priority Mail). Super holding, fast acting adhesive patch kit for waterbed bladders. That's what you need to make mattress repairs quickly and easily. The vinyl adhesive repair kit contains a 1 oz. tube of adhesive and patch material that measures 6" by 3". For use on PVC/Vinyl Waterbed bladders. Not intended for any other use.

Step 1 of 7: Which size mattress would you like?

Step 2 of 7: Comfort Level (Twin)

Step 2 of 7: Comfort Level (Full)

Step 2 of 7: Comfort Level (Queen)

Step 2 of 7: Comfort Level (California King)

Step 2 of 7: Comfort Level (Eastern King)

Step 2A of 7: Foam Overlay (Queen)

Step 2A of 7: Foam Overlay (East King)

Step 2B of 7: Foam Overlay (Cali King)

Step 2B of 7: Foam Overlay (Queen)

Step 2A of 7: Foam Overlay (Cali King)

Step 2B of 7: Foam Overlay (East King)

Step 3 of 7: California King Bladders

Step 3 of 7: Queen Bladders

Step 3 of 7: Eastern King Bladders

Step 3 of 7: Full Bladders

Step 3 of 7: Twin Bladders

Step 4 of 7: Heater Selection (Single)

Step 4 of 7: Heater Selection (Dual)

Step 5 of 7: Full Foundation

Step 5 of 7: Twin Foundation

Step 5 of 7: Queen Foundation

Step 5 of 7: California Foundation

Step 5 of 7: Eastern King Foundation

Step 6 of 7: Twin Frame

Step 6 of 7: Full Frame

Step 6 of 7: Queen Frame

Step 6 of 7: California Frame

Step 6 of 7: Eastern Frame

Step 7 of 7: Accessories

We are building your box.

Added to your cart: